Muton Rockhopper 46 Betriebsanweisung Seite 45
- Seite / 186
- Inhaltsverzeichnis
- FEHLERBEHEBUNG
- LESEZEICHEN
Bewertet. / 5. Basierend auf Kundenbewertungen
Rockhopper II series printers – User’s Guide
45
AP-75095, Rev. 2.1, 18/08/2005
4. PREPARING FOR A JOB
4.1. INTRODUCTION
The procedures needed before using the printer are explained below.
4.2. CONNECTING THE POWER CABLE
The connection procedure for the power cable is explained below.
Important :
•
Make sure that the distributed power cable is used. Use of a different cable
may result in electric shock or fire.
•
Do not use a damaged power cable. Doing so may result in electric shock or
fire.
•
The disconnect device is the plug on the power supply cord.
Caution :
• Be careful of the following when handling the power cable.
o Do not make any modifications to the power cable.
o Do not place anything heavy on the power cable.
o Do not bend, twist, or pull the cable.
o Do not wire the cable near equipment that generates heat.
Notes :
• If the power cable is damaged, contact one of the following :
o The shop where you bought your MUTOH printer.
o Your local MUTOH dealer.
- Rockhopper II 1
- Series printer 1
- COPYRIGHT NOTICE 3
- TABLE OF CONTENTS 7
- 1. SAFETY INSTRUCTIONS 13
- 1.4. WARNING LABELS 16
- No. Type 18
- Ink Type 19
- 2. PRODUCT OVERVIEW 21
- 2.3.1. Front 22
- 2.3.2. Back 23
- 2.3.4. Operation panel 26
- 2.4. PRINTER STATUS 28
- Notes : 29
- 3. SETTING UP THE UNIT 31
- 3.2.2. Accessories box 34
- 3.2.3. Stand packaging box 34
- 3.3. ASSEMBLY 35
- 3.3.2. Installing the stand 36
- A ) : Open the front cover 38
- 3.5. INSTALLATION 43
- Step 2 : Lock the casters 44
- 4. PREPARING FOR A JOB 45
- 4.4.1. Turning the power ON 49
- 4.4.2. Turning the power OFF 49
- 4.6. MEDIA HANDLING 54
- 4.6.2. Loading roll media 57
- 4.6.3. Setting media type 57
- 4.7. TESTPRINTING 59
- 4.7.1. Setup List 60
- 4.7.2. NozzleCheck 61
- 4.7.3. Alignment 61
- 4.7.4. Colour palette 62
- 4.7.5. Maintenance record 63
- 4.8.1. System requirements 64
- 4.8.2. Selecting cables 64
- 5. HANDLING THE PRINTER 67
- 5.3. USING MEDIA 68
- 5.3.4. The printing area 69
- Eco-Solvent Plus Media List 72
- 5.4.1. Setup menu 74
- Setup items 75
- 5.4.2. Ink status menu 76
- 5.4.3. Origin setup menu 77
- 5.4.4. Test print menu 78
- 5.4.5. Media setup menu 79
- 5.4.6. Media type menu 79
- 5.4.7. User media menu 80
- 5.4.9. InkDry menu 82
- 5.4.10. Head Height menu 83
- 5.4.11. Stiff menu 83
- 5.4.12. Thickness menu 84
- 5.4.13. Heater menu 84
- 5.4.14. Drier menu 85
- 5.4.15. Fixer menu 85
- 5.4.16. Post Fixer menu 86
- 5.4.22. Cut size menu 89
- 5.4.23. Top feed menu 89
- 5.4.24. Media cut menu 90
- 5.4.25. Shortest cut menu 90
- 5.4.26. Printing mode menu 91
- 5.4.28. Colour mode menu 92
- 5.4.30. InterLace Setup menu 93
- 5.4.32. Repeat printing menu 93
- 5.4.33. Repeat times menu 94
- 5.4.34. Interval time menu 94
- 5.4.35. Head speed menu 94
- 5.4.36. Command setup menu 95
- 5.4.37. Command select menu 96
- 5.4.38. Print step menu 96
- 5.4.39. Print position menu 96
- 5.4.40. Terminator menu 97
- 5.4.42. Online time out menu 98
- 5.4.43. Overwrite menu 98
- 5.4.44. Halftone menu 99
- 5.4.45. Layout setup menu 99
- 5.4.46. Layout method menu 100
- 5.4.47. Joint printing menu 100
- 5.4.49. Function setup menu 101
- 5.4.50. CMY 101
- K menu 101
- 5.4.51. Scale menu 102
- 5.4.52. Mirror menu 102
- 5.4.55. Centronics menu 103
- 5.4.56. Network setting menu 104
- 5.4.57. IP address menu 105
- 5.4.58. Subnet mask menu 105
- 5.4.59. Gateway menu 106
- 5.4.60. DHCP menu 106
- 5.4.61. MAC address menu 106
- 5.4.62. Version menu 107
- 5.4.63. Utility menu 107
- 5.4.64. ErrorDisplay menu 108
- 5.4.65. Media detection menu 108
- 5.4.67. Media width menu 109
- 5.4.68. Print and wipe menu 110
- Parameters Description 111
- 5.4.70. Write mode menu 112
- 5.4.71. Re-print menu 113
- 5.4.72. File delete menu 114
- 5.4.73. Re-name menu 114
- 5.4.74. Format menu 115
- 5.4.76. All Initialize menu 117
- 5.4.88. Data dump menu 121
- 5.4.89. Ink Manager menu 122
- 5.4.90. Head Wash menu 122
- 5.4.91. Ink Load menu 123
- 5.4.92. Ink Change menu 123
- 5.4.93. Cutter change menu 124
- 5.4.94. Wiper clean menu 124
- 5.4.95. Tank change menu 125
- 5.4.96. Tubing Flush menu 125
- 5.4.97. Version Check menu 126
- Step 1 : 127
- 5.5.3. Feeding media 132
- 5.5.5. Print mode check 133
- 5.6.1. Cutting media 134
- Step 4 : 135
- Step 2 : 135
- Step 3 : 135
- Step 5 : 136
- Caution : 136
- Step 6 : 136
- 6. TROUBLESHOOTING 137
- (19) Lines are missing 143
- (21) Top Feed problem 143
- 6.3. ERROR MESSAGES 144
- 6.4. WHEN MEDIA JAMS OCCUR 149
- 7. DAILY MAINTENANCE 151
- (2) Types 152
- (3) Replacement procedure 152
- Step 7 : 154
- Step 8 : 157
- Step 9 : 158
- Step 10 : 158
- Step 11 : 158
- 7.3. CLEANING 161
- (1) Cleaning frequency 162
- (2) Cleaning procedure 162
- 7.3.3. Head cleaning 163
- Step 12 : 167
- 7.4. CHANGING INK TYPES 168
- (1) Before the transfer 170
- (2) After the transfer 171
- 7.6. PERIODICAL SERVICES 172
- 7.7 END-USER SERVICE 174
- 8. APPENDIX 179
- 8.3. PRODUCT SPECIFICATIONS 180
- (1) Interface Specifications 182
- Item Specifications 183
- Name Model 184
Verwandte Produkte und Handbücher für Drucken & Scannen Muton Rockhopper 46
(258 Seiten)© 2020, manymanuals.de. Alle Rechte vorbehalten. | 0.065 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern